📄️ 1. Mount the device and sensors
Do this before you fill the reservoir: the water level sensor goes under the tank.
📄️ 2. Install the pumps and tanks
The control unit has seven numbered pump outlets plus one marked circ pump. Which pump goes where:
📄️ 3. Connect to the app
The Coltiva device talks to the app through the cloud, over your Wi-Fi. Connecting it takes a few minutes and is done entirely from your phone.
📄️ 4. Calibrate
Calibration is what makes doses and readings accurate. Do it once now. The Maintenance page says when to repeat it.
📄️ Preparing surfaces for gluing or taping
Before attaching magnets, sensors or the device bracket with glue or double-sided tape, it is essential to prepare the surfaces correctly to achieve good adhesion.